TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 443 of 1207

TM 9-2320-361-20

4-17. HEADLIGHT HIGH BEAM INDICATOR AND LAMP REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

All

MATERIALS/PARTS

Two lockwashers

REFERENCES (TM)

TM 9-2320-361-10

TM 9-2320-361-20P

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-361-10).

NOTE

Headlight high beam indicator assembly and the two instrument cluster light

assemblies are removed and installed the same. This procedure covers the

high beam indicator light.

1. Turn lens (2) to left and remove.

2. Push in and turn lamp (3) to left and remove.

3. Remove two screws (4), lockwashers (5), and headlight high beam indicator (6) from instrument

cluster (1). Discard lockwashers (5).

4. Disconnect connector (7) from headlight high beam indicator (6).

1. Connect connector (7) to headlight high beam indicator (6).

2. Install headlight high beam indicator (6) in instrument cluster (1) with two new lockwashers (5) and

screws (4).

3. Install lamp (3) on high beam indicator (6).

4. Install lens (2) over lamp (3).

4-32