TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 445 of 1207

TM 9-2320-361-20

4-19. TURN SIGNAL CONTROL AND INDICATOR LAMP REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

EQUIPMENT CONDITION

All

Ž Parking brake set (TM 9-2320-361-10).

Battery ground cable disconnected (para. 4-48).

REFERENCES (TM)

TM 9-2320-361-10

TM 9-2320-361-20P

1. Remove cable connector (5) from turn signal control (4).

2. Remove clamp (2) and turn signal control (4) from steering column (3).

3. Turn lamp lens (1) 1/2 turn to left and remove from turn signal control (4).

4.

Remove lamp (7) from lamp socket (6).

1. Install lamp (7) in lamp socket (6).

2. Install lamp lens (1) in turn signal control (4) and rotate 1/2 turn to right.

3. Install turn signal control (4) on steering column (3) with clamp (2).

4. Connect cable connector (5) to turn signal control (4).

FOLLOW-ON TASKS:

ŽConnect battery ground cable (para. 4-48).

Check turn signal control for proper operation (TM 9-2320-361-10).

4-34