TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 447 of 1207

TM 9-2320-361-20

4-21. ACCESSORY SWITCH REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-361-10

MATERIALS/PARTS

Two lockwashers

TM 9-2320-361-20P

EQUIPMENT CONDITION

Ž

Parking brake set (TM 9-2320-361-10).

Battery ground cable disconnected (para. 4-48).

1. Remove screw (9), lockwasher (10), and handle (8) from switch (4). Discard lockwasher (10).

2.

Remove nut (7), lockwasher (6), and switch plate (1) from switch (4). Discard lockwasher (6).

3. Remove switch (4) from instrument panel (5).

NOTE

Tag wires for installation.

4. Disconnect wires (11), (12), (13), and (14) from switch (4).

1. Connect wires (11), (12), (13), and (14) to switch (4).

2. Install switch (4) and switch plate (1) on instrument panel (5) with new lockwasher (6) and nut (7).

Position locator tab (3) in hole (2).

3. Install handle (8) on switch (4) with new lockwasher (10) and screw (9).

FOLLOW-ON TASKS:

Connect battery ground cable (para. 4-48).

Check accessory switch for proper operation (TM 9-2320-361-10).

4-36