TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 491 of 1207

TM 9-2320-361-20

4-51. WIRING HARNESS CONNECTOR REPAIR (Contd)

b. Male Cable Connector Repair

1.

2.

3.

4.

5.

Strip cable insulation (1) from cable (2) to equal depth of terminal well (5).

Slide shell (3) over cable insulation (1).

Insert cable (2) into terminal well (6) and crimp.

Place slotted washer (4) over crimped junction at terminal (6).

Slide shell (3) over slotted washer (4) and terminal (6).

c. Female Cable Connector Repair

1. Strip cable insulation (7) from cable (8) to equal depth of terminal well (11).

2. Slide shell (9) and sleeve (10) over cable insulation (7).

3. Insert cable (8) into terminal well (11) and crimp.

4. Slide shell (9) and sleeve (10) over terminal (12).

d. Connector Assembly Repair

NOTE

Refer to TM 9-237 for soldering instructions.

1. Strip cable insulation (13) to depth of solder wells (16) on inserts (17).

2. Slide cable ends (20) through grommet retaining nut (14) and grommet (16).

3. Place cable ends (20) into solder wells (16) and solder.

4. Slide grommet (15) over inserts (17) and press into shell assembly (18) until seated.

5. Screw grommet retaining nut (14) on shell assembly (18) and coupling nut (19) until seated.

4-80