TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 481 of 1207

TM 9-2320-361-20

4-46. REAR COMPOSITE LAMPS AND HOUSING REPLACEMENT

This task covers:

a. Rear Composite Lamps Removal

c. Rear Composite Lamps Housing Installation

b. Rear Composite Lamps Housing Removal

d. Rear Composite Lamps Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-361-10

MATERIALS/PARTS

TM 9-2320-361-20P

Two lockwashers

EQUIPMENT CONDITION

Gasket

Parking brake set (TM 9-2320-361-10).

Battery ground cable disconnected (para. 4-48).

a. Rear Composite Lamps Removal

1. Loosen six screws (8) and remove lens (9) and gasket (7) from composite lamp housing (5). Discard

gasket (7).

2. Remove lamp(s) (6) from composite lamp housing (5).

b.

Rear Composite Lamps Housing Removal

I

NOTE

Tag all wires for installation.

1. Disconnect four wires (10) from wires (4).

2. Remove two screws (1), lockwashers (2), and

lockwashers (2).

c. Rear Composite Lamps Housing Installation

composite lamp housing (5) from bracket (3). Discard

1. Install composite lamp housing (5) on bracket (3) with two new lockwashers (2) and screws (1).

2. Connect four wires (10) to wires (4).

d. Rear Composite Lamps Installation

1. Install lamp(s) (6) in composite lamp housing (5).

2. Install new gasket (7) and lens (9) on composite lamp housing (5) with six screws (8).

4-70