TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 472 of 1207

TM 9-2320-361-20

4-40. INTERMEDIATE TURN SIGNAL REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

All

REFERENCES (TM)

TM 9-2320-361-10

MATERIALS/PARTS

TM 9-2320-361-20P

Three lockwashers

EQUIPMENT CONDITION

Two O-rings

Parking brake set (TM 9-2320-361-10).

Battery ground cable disconnected (para. 4-48).

a. Removal

1. Remove amber lens (4), red lens (1), two O-rings (2), and lamp (3) from bracket (14). Discard

O-rings (8).

2. Disconnect wire (13) from connector (12).

3. Remove nut (5), lockwasher (6), washer (15), and bracket (14) from brush guard (7). Discard

lockwasher (6).

4. Remove two screws (11), lockwashers (10), nuts (9), and brush guard (7) from bracket (8). Discard

lockwashers (10).

1. Install brush guard (7) on bracket (8) with two screws (11), new lockwashers (10), and nuts (9).

2. Install bracket (14), washer (15), new lockwasher (6), and nut (5) on brush guard (7).

3. Connect wire (13) to connector (12).

4. Install lamp (3), two new O-rings (2), red lens (1), and amber lens (4) on bracket (14).

FOLLOW-ON TASKS:

Connect battery ground cable (para. 4-48).

Check operation of intermediate turn signal ight (TM 9-2320-361-10).

4-61