TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 480 of 1207

para. 4-48

TM 9-2320-361-10

TM 9-2320-361-20

4-45. SIDE MARKER AND CLEARANCE LAMPS REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-361-10

MATERIALS/PARTS

TM 9-2320-361-20P

Six lockwashers

EQUIPMENT CONDITION

Locknut

Parking brake set (TM 9-2320-361-10).

Battery ground cable disconnected (para. 4-48).

NOTE

All side marker lights and clearance lights are replaced the same.

1. Remove two screws (11), lens frame (10), and lens (9) from marker light base (6).

2. Remove lamp (8) from marker light base (6).

3. Remove four nuts (3), lockwashers (4), and screws (7) from marker light base (6) and bracket (5).

Discard lockwashers (4).

4. Disconnect wire (2) from wire (1) and remove marker light base (6) from bracket (5).

5. Remove locknut (13), two lockwashers (14), screw (15), and bracket (5) from fender (12). Discard

lockwashers (14) and locknut (13).

b. Installation

1. Install bracket (5) on fender (12) with screw (15), two new lockwashers (14), and new locknut (13).

2. Connect wire (2) to wire (1).

3. Install marker light base (6) on bracket (5) with four screws (7), new lockwashers (4), and nuts (3).

4. Install lamp (8) in marker light base (6).

5. Install lens (9) and lens frame (10) on marker light base (6) with two screws (11).

4-69