TM-9-2320-361-20
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
OCTOBER 1991
TM-9-2320-361-20 - Page 498 of 1207
TM 9-2320-361-20
5-3. TRANSMISSION GEARSHIFT LEVER KNOB AND BOOT REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
EQUIPMENT CONDITION
All
Parking brake set (TM 9-2320-361-10).
REFERENCES [TM]
TM 9-2320-361-10
TM 9-2320-361-20P
a. Removal
1. Rotate gearshift knob (1) counterclockwise, and remove from gearshift lever (3).
2.
Slide boot (2) up and off ball socket pedestal (4) and gearshift lever (3).
1.
2.
CAUTION
Use care during installation to prevent sharp edges from cutting boot.
Slide boot (2), small end facing up, over gearshift lever (3) and slide down to fit over ball socket
pedestal (4) on transmission housing.
Rotate gearshift knob (1) clockwise to install on gearshift lever (3).
5-3
Back to Top
