TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 764 of 1207

TM 9-2320-361-20

11-33. WINDSHIELD WIPER MOTOR AIR TUBES REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

EQUIPMENT CONDITION

All

Parking brake set (TM 9-2320-361-10).

REFERENCES (TM)

TM 9-2320-361-10

TM 9-2320-361-20P

Air reservoir drained (TM 9-2320-361-10).

a. Removal

1. Compress two clamps (4) and remove hose (13) from copper tube (3) and fitting (12).

2. Remove three screws (1) and clamps (2) from windshield outer frame (8). Compress clamp (4) and

remove copper tube (3) from hose (5).

3. Compress three clamps (4) and remove hoses (5), (6), and (10) from tee (11).

4. Remove screw (1) and clamp (9) from windshield outer frame (8). Compress two clamps (4) and

remove hoses (10) and (6) from windshield wiper motors (7).

b. Installation

1. Compress two clamps (4) and install hoses (10) and (6) on windshield wiper motors (7). Install

clamp (9) on hose (6) and windshield outer frame (8) with screw (1).

2. Compress three clamps (4) and install hoses (5), (6), and (10) on tee (11).

3. Compress clamps (4) and install copper tube (3) on hose (5). Install three clamps (2) on copper

tube (3) and windshield outer frame (8) with three screws (1).

4. Compress two clamps (4) and install hose (13) on copper tube (3) and fitting (12).

FOLLOW-ON TASK: Start engine, check for leaks (TM 9-2320-361-10).

11-67