TM 9-2320-361-20
11-39. PERSONNEL HEATER DIVERTER REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-361-10
MATERIALS/PARTS
TM 9-2320-361-20P
Four lockwashers
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-361-10).
a. Removal
1. Loosen clamp (11) and disconnect supply hose (13) from diverter (9).
2. Loosen two clamps (4) and disconnect two defroster hoses (3) from diverter (9).
3. Loosen screw (7) and holddown clamp (8) and disconnect cable (10) from shaft handle (6).
4. Remove four nuts (1), lockwashers (2), screws (5), and diverter (9) from firewall (12). Discard
lockwashers (2).
b. Installation
1. Install diverter (9) on firewall (12) with four screws (5), new lockwashers (2), and nuts (1).
2. Install cable (10) through holddown clamp (8) and on shaft handle (6). Tighten holddown clamp (8)
with screw (7).
3. Install two defroster hoses (3) on diverter (9) with two clamps (4).
4. Install supply hose (13) on diverter (9) with clamp (11).
FOLLOW-ON TASK: Adjust control cable (para. 11-41).
11-76