TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

  TM-9-2320-361-20 - Page 769 of 1207

TM 9-2320-361-20
11-36. MIRROR AND BRACKETS REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-361-10
MATERIALS/PARTS
TM 9-2320-361-20P
Ten locknuts
EQUIPMENT CONDITION
Screw-assembled lockwasher
Parking brake set (TM 9-2320-361-10).
a. Removal
1.
2.
3.
4.
5.
6.
7.
8.
9.
Remove screw-assembled washer (26), convex mirror (17), locknut (16), washer (15), two
brackets (23), and screw (25) from brace (24). Discard locknut (16) and screw-assembled washer (26).
Remove two locknuts (18), washers (19), spacers (20), and mirror (21) from bracket (22). Discard
locknuts (18).
Remove two locknuts (10), four washers (11) and (14), rod (30), brace (24), and bracket (22) from
braces (12), (13), (27), (28), and (29). Discard locknuts (10).
Remove locknut (7), washer (6), hinge bolt (9), and braces (13) and (27) from upper door hinge (5).
Discard locknut (7).
Install hinge bolt (9) in upper door hinge (5).
Remove locknut (7), washer (6), hinge bolt (9), and brace (29) from top of lower door hinge (31).
Discard locknut (7).
Install hinge bolt (9) in lower door hinge (31).
Remove locknut (7), washer (6), screw (8), and braces (12) and (28) from clip (4). Discard locknut (7).
Remove two locknuts (1), plate (2), clip (4), and screws (32) from cowling (3). Discard locknuts (1).
1. Install clip (4) and plate (2) on cowling (3) with two screws (32) and new locknuts (1).
2. Install braces (12) and (28) on clip (4) with screw (8), washer (6), and new locknut (7).
3. Remove hinge bolt (9) from lower door hinge (31).
4. Install brace (29) on top of lower door hinge (31) with hinge bolt (9), washer (6), and new locknut (7).
5. Remove hinge bolt (9) from upper door hinge (5).
6. Install braces (13) and (27) on upper door hinge (5) with hinge bolt (9), washer (6), and new
locknut (7).
7. Install bracket (22), brace (24), and rod (30) on braces (12), (13), (27), (28), and (29) with four
washers (11) and (14) and two new locknuts (10).
11-72


Back to Top