TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 775 of 1207

TM 9-2320-361-20

11-41. PERSONNEL HEATER CONTROL CABLES REPLACEMENT

This task covers:

a. Removal

c. Adjustment

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-361-10

MATERIALS/PARTS

Four lockwashers

TM 9-2320-361-20P

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-361-10).

1. Loosen screw (6) and remove cable (7) from shaft (5) and clamp (4) on diverter (3).

2. Loosen screw (16) and remove cable (8) from shaft (18) and clamp (19) on adapter (17).

3. Remove two nuts (1), lockwashers (2), screws (10), and bracket (9) from instrument panel (15).

Discard lockwashers (2).

4. Remove nut (13), lockwasher (11), and cable (8) from bracket (9). Discard lockwasher (11).

5. Remove nut (14), lockwasher (12), and cable (7) from bracket (9). Discard lockwasher (12).

b.

Installation

1. Install cable (7) in bracket (9) with new lockwasher (12) and nut (14).

2. Install cable (8) in bracket (9) with new lockwasher (11) and nut (13).

3. Install bracket (9) to instrument panel (15) with two screws (10), new lockwashers (2), and nuts (1).

4. Insert cable (8) through clamp (19) and install on shaft (18) of adapter (17).

5. Insert cable (7) through clamp (4) and install on shaft (5) of diverter (3).

1. Loosen screw (16) and slide cable (8) through clamp (19).

2. Push shaft (18) of adapter (17) forward and tighten screw (16).

3. Loosen screw (6) and slide cable (7) through clamp (4).

4. Push shaft (5) of diverter (3) to the right, and tighten screw (6).

11-78