TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 893 of 1207

12-68.

TM 9-2320-361-20

This task covers:

a.

Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

M185A3, M109A3

TM 9-2320-361-10

MATERIALS/PARTS

TM 9-2320-361-20P

Three lockwashers

EQUIPMENT CONDITION

• Parking brake set (TM 9-2320-361-10).

•

Converter removed (para. 12-69).

1. Remove fourteen screws (13) from converter front panel (3) and converter (6).

2. Turn screw (9) and open door (10). Pull converter front panel (3) away from converter (6).

3. Remove two screws (1), exhaust blower switch (4), and identification plate (2) from converter front

panel (3).

NOTE

Tag all wires for installation.

4. Remove three screws (8), lockwashers (7), resistor (5), and two wires (11) and (12) from exhaust

blower switch (4). Discard lockwashers (7).

1. Install wire (12) on exhaust blower switch (4) with new lockwasher (7) and screw (8).

2. Install resistor (5) and wire (11) on exhaust blower switch (4) with two new lockwashers (7) and

screws (8).

3. Install exhaust blower switch (4) and identification plate (2) on converter front panel (3) with two

screws (1).

4. Install converter front panel (3) on converter (6) with fourteen screws (13).

5. Close door (10) and turn screw (9).

12-110