TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 896 of 1207

12-70.

TM 9-2320-361-20

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES

(TM)

M109A3, M185A3

TM 9-2320-361-10

MATERIALS/PARTS

TM 9-2320-361-20P

Eight locknuts

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-361-10).

NOTE

Left and right front splash guards are removed the same, except for

two additional screws for the pioneer tool bracket on the left side.

This procedure is for the left front splash guard.

1. Remove two locknuts (6) and screws (3) from two braces (9) and frame (4). Discard locknuts (6).

2. Remove two locknuts (11), screws (8), and two braces (9) from splash guard (10). Discard

locknuts (11).

3. Remove two locknuts (12) and screws (7) from pioneer tool bracket (13) and splash guard (10).

Discard locknuts (12).

4. Remove two locknuts (1), screws (5), and splash guard (10) from frame (2). Discard locknuts (1).

1. Install splash guard (10) on frame (2) with two screws (5) and new locknuts (1).

2. Install pioneer tool bracket (13) on splash guard (10) with two screws (7) and new locknuts (12).

3. Install two braces (9) on frame (4) with two screws (3) and new locknuts (6).

4. Install two braces (9) on splash guard (10) with two screws (8) and new locknuts (11).

12-113