TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 905 of 1207

12-75.

TM 9-2320-361-20

This task covers:

a.

Removal

c.

Assembly

b. Disassembly

d. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

M185A3, M109A3

TM 9-2320-361-10

MATERIALS/PARTS

TM 9-2320-361-20P

Six lockwashers

EQUIPMENT CONDITION

Two locking rings

• Parking brake set (TM 9-2320-361-10).

• Battery ground cable disconnected (para. 4-48)

NOTE

Tag all wires and terminals for installation.

1. Remove four screws (1) and power switch cover (3) from van body (2).

2. Remove two screws (9), lockwashers (8), and wires (4) and (10) from switch (11). Discard

Iockwashers (8).

3. Remove two screws (7), lockwashers (6), and wires (4), (5), (12) and (13) from switch (14). Discard

lockwashers (6).

1. Remove two nuts (18), Iockwashers (17), and power switch cover (3) from switches (11) and (14).

Discard lockwashers (17).

2. Remove two locking rings (15) and nuts (16) from

switches (11) and (14). Discard locking rings (16).

1. Install two nuts (16) and new locking rings (15) on switches (14) and (11).

2. Install switches (14) and (11) on power switch cover (3) with two new lockwashers (17) and nuts (18).

1. Install wires (4), (5), (12), and (13) on switch (14) with two new lockwashers (6) and screws (7).

2. Install wires (4) and (10) on switch (11) with two new lockwashers (8) and screws (9).

3. Install power switch cover (3) on van body (2) with four screws (1).

12-122