TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 918 of 1207

12-84.

TM 9-2320-361-20

NOTE

Perform step 1 if saddle webbing was removed.

1. Install new saddle webbing (14) on cab protector (15) with adhesive.

2. Install two straps (17) on chock block holder (16) with four screws (18), new lockwashers (19), and nuts (20).

3. Install four hoses (21), two straps (22), four washers (23), screws (24), and wingnuts (25) on cab

protector (15).

WARNING

Personnel must stand clear during lifting operations. A swinging or

shifting load may cause injury to personnel.

NOTE

Assistant will help with step 4.

4. Install chain sling (12) on cab protector (15) and lifting device (13) and lift cab protector (15) onto

four tubes (11).

5. Install four upper pins (10) through cab protector (15) and four tubes (11).

FOLLOW-ON TASK: Lower derrick to stowed position (TM 9-2320-361-10).

12-135