TM-9-2320-361-20
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
OCTOBER 1991
TM-9-2320-361-20 - Page 961 of 1207
TM 9-2320-361-20
12-110. FRONT AND REAR DECK REPLACEMENT
This task covers:
a. Rear Deck Removal
c. Front Deck Installation
b. Front Deck Removal
d. Rear Deck Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
M275A2
TM 9-2320-361-10
MATERIALS/PARTS
Twenty-six locknuts
PERSONNEL REQUIRED
Two
TM 9-2320-361-20P
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-361-10).
Toolbox removed (para. 12-111).
Water can bracket removed (para. 11-24).
Rear splash guards removed (para. 12-109).
Remove six locknuts (12), screws (10), and rear deck (9) from frame (11). Discard locknuts (12).
1. Remove three locknuts (8), screws (7), and support (6) from front deck (4). Discard locknuts (8).
2. Remove four locknuts (5), screws (2), and angle (3) from front deck (4). Discard locknuts (5).
3. Remove eight locknuts (14) and screws (18) from angle brackets (15) and front deck (4). Discard
locknuts (14).
4. Remove locknut (17) and screw (19) from clamp (16) and front deck (4).
CAUTION
Raise mast hose support only as high as necessary to remove front
deck. Raising mast hose too high will result in damage to air hoses.
NOTE
Assistant will help with steps 5 and 6.
5. Remove four locknuts (20) and screws (l), and raise mast hose support (13) from front deck (4).
Discard locknuts (20).
6. While supporting mast hose support (13), remove front deck (4) from four angle brackets (15).
c. Front Deck Installation
CAUTION
Raise mast hose support only as high as necessary to install front
deck. Raising mast hose too high will result in damage to air hose.
NOTE
Assistant will help with step 1.
1. While supporting mast hose support (13), install front deck (4) on four angle brackets (15).
2. Install mast hose support (13) on deck plate (4) with four screws (1) and new locknuts (20).
3. Install clamp (16) on front deck (4) with screw (19) and new locknut (17).
12-178
Back to Top
