TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 968 of 1207

TM 9-2320-361-20

13-3. FRONT WINCH CABLE REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

EQUIPMENT CONDITION

All

Parking brake set (TM 9-2320-361-10).

REFERENCES (TM)

LO 9-2320-209-12-1

TM 9-2320-361-10

Front winch cable unwound (TM 9-2320-361-10).

GENERAL SAFETY INSTRUCTIONS

Wear leather gloves when handling winch cable.

TM 9-2320-361-20P

WARNING

Wear leather gloves when handling cable. Do not let cable run

through hands. Broken or rusty wires can cause injury to personnel.

1. Loosen setscrew (2) and remove front winch cable (3) from drum (l).

2. Remove nut (4) and screw (6) from clevis (7) and remove chain (5).

1.

2.

Install chain (5) on clevis (7) with screw (6) and nut (4).

Install front winch cable (3) in drum (1) and tighten setscrew (2).

FOLLOW-ON TASKS:

Wind front winch cable on front winch drum (TM 9-2320-361-10).

Lubricate winch cable (LO 9-2320-209-12-1).

13-3