TM-9-2320-361-24-1

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 1 OF 2

AUGUST 2006

TM-9-2320-361-24-1 - Page 311 of 1176

TM 9-2320-361-24-1

0018 00

0018 00-7

SIMPLIFIED TEST EQUIPMENT FOR INTERNAL COMBUSTION ENGINE—

REPROGRAMMABLE STE/ICE-R NO-GO CHAIN TROUBLESHOOTING (Contd)

Table 2. STE/ICE-R No-Go Chain Test (Contd).

TK ITEM 14

FUEL PRESSURE

TRANSDUCER INSTALLATION

STEP 3

TK ITEM 26

TK ITEM 22

P2

CABLE W4

• Dial 49 into TEST SELECT switches and press

TEST.

• Press and hold TEST until CAL message appears

on display.

• Release TEST.

• Wait for offset value to appear on display.

• Is offset value within range of –4 to +4?

TEST NO.

TEST

49

0–25 PSIG PRESSURE

PROMPTING

MESSAGE

INSTALL TRANSDUCER:

• Install pressure transducer (red stripe) in outlet

side of secondary fuel filter.

• Connect P1 of transducer cable W4 to J2 on VTM.

• Connect P2 of transducer cable to connector on

transducer.

3

4

• Proceed to step 4.

NO

YES

• Proceed to TM 9-4910-571-12&P

for offset fault isolation.

ENGINE CRANK—NO START (Contd)

NG30

TK

MODE