TM 9-2320-361-24-1
0018 00
0018 00-31
SIMPLIFIED TEST EQUIPMENT FOR INTERNAL COMBUSTION ENGINE—
REPROGRAMMABLE STE/ICE-R NO-GO CHAIN TROUBLESHOOTING (Contd)
Table 2. STE/ICE-R No-Go Chain Test (Contd).
GOVERNOR/POWER TEST FAULT ISOLATION (Contd)
NG90
TK
MODE
INSTALL TRANSDUCER
• Install pressure transducer, TK Item 17 (Blue
Stripe) in outlet side of secondary fuel filter.
• Connect P1 of transducer cable W4 to J2 on VTM.
• Connect P2 of transducer cable to connector on
transducer.
3
• Dial 50 into TEST SELECT switches and press
TEST.
• Press and hold TEST until CAL message
appears on display.
• Release TEST.
• Wait for offset value to appear on display.
• Proceed to next page.
TEST NO.
TEST
50
0–1000 PSIG, PRESSURE
PROMPTING
MESSAGE
FUEL PRESSURE TRANSDUCER INSTALLATION
TK ITEM 17
TK ITEM 20
TK ITEM 27
W4
P2