TM-9-2320-361-24-1

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 1 OF 2

AUGUST 2006

TM-9-2320-361-24-1 - Page 512 of 1176

TM 9-2320-361-24-1

0046 00

0046 00-12

ENGINE REPLACEMENT (Contd)

REMOVAL (Contd)

43.

Remove six screws (7), washers (8), and support plate (10) from two front engine supports (9).

44.

Remove two screws (5), screws (6), washers (4), and two front engine supports (9) from engine (1).

45.

Remove eight locknuts (3) and two rear engine supports (2) from engine (1). Discard locknuts (3).

CAUTION

Before removing transmission, ensure transmission is properly

supported. Failure to do so may result in damage to equipment.

46.

Position transmission jack or wooden supports under transmission (13).

47.

Remove twelve screw-assembled lockwashers (12) from transmission (13) and flywheel

housing (11). Discard screw-assembled lockwashers (12).

48.

Remove transmission (13) and gasket (14) from flywheel housing (11). Discard gasket (14).

NOTE

If clutch replacement is required, perform step 49.

49.

Remove pressure plate and clutch (WP 0050 00).

2

3

1

4

5

6

4

7

8

9

10