TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 425 of 764

TM 9-2320-361-34

15-31. ACCESS DOOR REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

MATERIALS/PARTS

M185A3 and M109A3

Five rivets (Appendix F, Item 211)

TOOLS

Five plugs (Appendix F, Item 202)

General mechanic’s tool kit (Appendix B, Item 1)

REFERENCES (TM)

Riveting tool (Appendix B, Item 20)

TM 9-2320-361-34P

a. Removal

1.

Open access door (2).

2. Drill plug (5) and rivet (4) out of van wall

(1)

and chain (3). Discard plug (5) and rivet (4).

3. Unfasten

two hinges

(6) from two latch locks (9).

4. Remove

access

door

(2)

from

van

wall (1).

5. Drill

out

four plugs (7) and rivets (8) from van wall (1) and latch locks (9). Discard plugs (7) and

rivets (8).

6. Remove

two

latch locks

(9) and

spacers (10) from van wall (1).

7. Remove screw (11), handle (12), and washer

(13)

from access door (2).

I

b. Installation

1. Install washer (13) and handle (12) on access door (2)

with screw (11).

2. Install two spacers (10) and latch locks (9) on van wall (1) with four new rivets (8) and new

plugs (7).

3. Position access door (2) on van wall (1).

4. Fasten two hinges (6) on two latch locks (9).

5. Install new rivet (4) and new plug (5) through chain (3) and on van wall (1).

6. Close access door (2).

15-114