TM-9-2320-361-34
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
MAY 1992
TM-9-2320-361-34 - Page 469 of 764
TM 9-2320-361-34
15-41. POWER LEVELER MAINTENANCE
THIS TASK COVERS:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning and Inspection
INITIAL SETUP
APPLICABLE MODELS
M764
TOOLS
General mechanic’s
tool
kit
(Appendix B, Item 1)
Mechanical puller kit (Appendix B,
MATERIALS/PARTS
Three cotter pins (Appendix F, Item 8)
Two cotter pins (Appendix F, Item 9)
Cotter pin (Appendix F, Item 10)
Two woodruff keys (Appendix F, Item 274)
Woodruff key (Appendix F, Item 299)
Two lockwashers (Appendix F, Item 138)
Six lockwashers (Appendix F, Item 127)
Shim set (Appendix F, Item 252)
Shim set (Appendix F, Item 251)
Shim set (Appendix F, Item 253)
MATERIALS/PARTS (Contd)
Shim set (Appendix F, Item 254)
Safety wire (Appendix C, Item 31)
GAA grease (Appendix C, Item 8)
REFERENCES (TM)
tern
22)
TM 9-214
TM 9-2320-361-10
TM 9-2320-361-20
TM 9-2320-361-34P
EQUIPMENT CONDITION
●
Parking brake set (TM 9-2320-361-10).
. Horizontal leveling worm drivechain removed
(TM 9-2320-361-20).
●
Vertical leveling worm drivechain removed
(TM 9-2320-361-20).
1.
2.
3.
4.
5.
6.
7.
Loosen nut (26) and remove sprocket (25) from bracket
(22).
Remove two screws (23) and lockwashers (24) from bracket (22). Discard lockwashers (24).
Remove two cotter pins (16), clevis pins (1), and retaining links (2) from shifiing rod (28) and power
leveler housing (21). Discard cotter pins (16).
Remove cotter pin (27), clevis pin (17), and shifting rod (28) from shifter shaft (18). Discard cotter
pin (27).
Remove safety wire (10), loosen setscrew (9), and remove sprocket (8) and woodruff key (19) from
shaft (20). Discard safety wire (10) and woodruff key (19).
Loosen nut (12) and remove sprocket (7) from bracket (11).
Remove screws (13) and (14), two screws (6), four lockwashers (5), two washers (4), bracket (11), and
shims (3) and (15) from power leveler housing (21). Record thickness of shims (3) and (15). Discard
shims (3) and (15) and lockwashers (5).
15-158
Back to Top
