TM 9-2320-361-34
15-41.
POWER LEVELER MAINTENANCE
(Contd)
8. Remove screw (1), stud (3), two lockwashers (2), and power leveler housing (4) from intermediate
case (5). Discard lockwashers (2).
b. Disassembly
1.
2.
3.
4.
5.
6.
7.
8.
Remove two screws (25), lockwashers (24), and housing cap (29) from housing (12). Discard
lockwashers (24).
Remove safety wire (27), loosen setscrew (26), and remove sprocket (28) and woodruff key (30) from
worm drive pinion (31).
Remove worm drive pinion (31) from housing cap (29).
Remove cotter pin (17), nut (16), washer (15), takeoff pinion (14), woodruff key (19), and spacer (13)
from drive shaft (18). Discard cotter pin (17) and woodruff key (19).
Remove cotter pin (7), nut (6), bearing retainer (8), shims (9), sprocket (10), and bearing (11) from
shaft (18). Record thickness of shims (9). Discard shims (9) and cotter pin (7).
Remove shaft (18) from housing (12).
Remove cotter pin (20), nut (21), bearing (22), and shims (23) from housing (12). Record thickness of
shims (23). Discard shims (23) and cotter pin (20).
Remove shaft (35), yoke (34), clutch (33), and worm drive gear (32) from housing (12).
15-160