TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 720 of 764

TM 9-23209361-34

APPENDIX

D

ILLUSTRATED LIST OF MANUFACTURED ITEMS

This appendix includes complete instructions for making items authorized to be manufactured or

fabricated at direct and general support maintenance levels.

D-1.

Fuel Injection Pump Gear Hub Wrench

D-1

D-2.

Fuel Line Dust Cap Assembly Tool

D-2

D-3.

Flywheel Guide Screw

D-3

Notes:

1.

Fabricate from NSN 9510-00-596-2063, QQS634, carbon steel bar, 8 in. (203.20 mm) x 2 in.

(50.8 mm) x 0.38 in. (9.65 mm).

2.

The tolerance on all three place decimal dimensions is ±0.005 in. (0.127 mm) and the tolerance on

all two place decimal dimensions is ±0.03 in. (0.76 mm).

3.

Trim steel to specifications per above diagram.

4.

Drill two holes to specifications per above diagram.

5. Tool is used for removal of hub on fuel injection pump.

Figure D-1. Fuel Injection Pump Gear Hub Wrench.

D-1