TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 721 of 764

TM 9-2320-361-34

APPENDIX D

(Contd)

Notes:

1.

Fabricate from NSN 9510-00-224-1691, MS500106-015, carbon steel cylinder, 5.000 in.

(127.000 mm) in. length and 0.90 in. (22.86 mm) in diameter.

2.

The tolerance on all three place decimal dimensions is +0.005 in. (0.127 mm) and the tolerance on

all two place decimal dimensions is +0.03 in. (0.76 mm).

3.

Trim steel to specifications per above diagram.

4.

Drill one hole to specifications per above diagram.

5. Tool is used for installation of dust caps

on fuel injector tubes.

-.

.

.-

.

Figure D-2. Fuel Line Dust Cap Assembly Tool.

D-2