TM-9-2320-361-34
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
MAY 1992
TM-9-2320-361-34 - Page 722 of 764
TM 9-2320-361-34
APPENDIX D
(Contd)
D-3 (D-4
blank)
Notes:
1.
Fabricate from NSN 5305-00-716-8179, MS 90726-121, 1/2-20 UNF 2A x 3.500 in. (88.9 mm) screw.
2.
The tolerance on all three place decimal dimensions is + 0.005 in. (0.127 mm).
3.
Cut off hexagon head of screw per above diagram.
4.
Grind sharp edges from cut end.
5.
Tool is used for removal and installation of flywheel.
Figure D-3. Flywheel Guide Screw.
Back to Top
