TM-9-2320-362-14-P

TRUCK UTILITY: S250 SHELTER CARRIER, 4X4, M1037 FOR TRAFFIC JAM AN/TLQ-17A(V)3 (HMMWV)

TECHNICAL MANUAL; OPERATOR, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR ELECTRICAL ENVIRONMENTAL SYSTEM (EES)

APRIL 1992

TM-9-2320-362-14-P - Page 102 of 353

T

M

9-2320-362-14&P

3-31. POWER INTERFACE BOX REPAIR (Cont’d)

c. Strike and Clamping Catch Removal

1.

Unlatch clamping catch (1) from strike (5) and open cover (4).

2.

Remove two screws (2) and self-locking nuts (3) from clamping

catch (l).

Remove clamping catch (l). Discard self-locking

nuts (3).

3.

Remove two screws (7) and lockwashers (6) from strike (5).

Remove strike (5).

Discard lockwashers (6).

d. Strike and Clamping Catch Installation

Install strike (5) to cover (4) and

lockwashers (6).

Install clamping catch (1) to cover

and self-locking nuts (3).

Close cover (4) and fasten clamping

secure with two screws (7) and

(4) and secure with two screws (2)

catch (1) to strike (5).

3-7 2