TM-9-2320-362-14-P
TRUCK UTILITY: S250 SHELTER CARRIER, 4X4, M1037 FOR TRAFFIC JAM AN/TLQ-17A(V)3 (HMMWV)
TECHNICAL MANUAL; OPERATOR, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR ELECTRICAL ENVIRONMENTAL SYSTEM (EES)
APRIL 1992
TM-9-2320-362-14-P - Page 94 of 353
TM 9-2320-362-14&P
3-29. WIRE NO. 798 REPAIR
This task covers:
a. Terminal lug Removal
c. Connector Replacement
b. Terminal lug Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanic’s tool kit:
●
automotive (Item 1, Section III,
Appendix B)
●
Manual References
TM 9-2320-280-10
TM 9-2320-280-20
Hood raised and secured
(TM 9-2320-280-10)
Battery ground cable disconnected
(TM 9-2320-280-20)
a. Terminal Lug Removal
1.
Remove terminal lug (2) from wire no. 798 (l).
b. Terminal Lug Installation
1.
Strip insulation on wire no.
798 (1) to equal depth of terminal lug
well (2).
2.
Place terminal lug (2)
on wire no. 798 (1) and crimp in place.
I
c. Connector Replacement
I
NOTE
Refer to TM 9-2320-280-20 for replacement of
connector.
3-64
Back to Top
