TM-9-2320-362-14-P

TRUCK UTILITY: S250 SHELTER CARRIER, 4X4, M1037 FOR TRAFFIC JAM AN/TLQ-17A(V)3 (HMMWV)

TECHNICAL MANUAL; OPERATOR, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR ELECTRICAL ENVIRONMENTAL SYSTEM (EES)

APRIL 1992
TM-9-2320-362-14-P

  TM-9-2320-362-14-P - Page 151 of 353

TM 9-2320-362-14&P
Antiseize compound,
conductive (Appendix C,
Item 1)
Cable assembly W66
P/N C5136366
One connector
P/N MS27144-1
One loop clamp
P/N MS21333-123
One safety tab P/N C5136342
One metric hex head cap
screw P/N B18231A10020NF
One wire no. 798
P/N C5136367
Six adapters P/N 8741492
Six 3-way connectors
P/N MS27147-1
Solder, tin alloy
(Appendix C, Item 8)
Tie-straps (as required)
P/N MS3367-2-0
Two connectors
P/N MS27142-2
Materials/Parts (Cont’d)
Materials/Parts (Cent’d)
dd.
Freon lines installation
ff.
Hand throttle cable
(Cont’d)
●
One female quick disconnect
(A/C discharge)
P/N C5136152-5 (.500)
●
One “O” ring (A/C
discharge)
P/N 12341984-4
●
One “O” ring (A/C
suction) P/N 12341984-2
●
Two swaging sleeves
P/N MS51844-62
●
Tie-straps (as required)
P/N MS3367-1-9
●
Tie-straps (as required)
P/N MS3367-3-0
●
Tie-straps (as required)
P/N MS3367-5-9
●
Tape, pressure sensitive
(as required)
(Appendix C, Item 9)
ee.
Cable assembly W66
installation
●
●
●
●
●
●
●
●
ff.
Hand throttle cable
installation
●
One hand throttle cable
P/N C5136358
●
One hand throttle bracket
P/N C5136357
installation (Cont’d)
●
One throttle cable end
bracket P/N C5136359
•Three self-locking
nuts
P/N MS17830-4C
gg.
Storage box and cable assembly
W64 installation
●
One storage box P/N C5136310
●
One cable assembly W64
P/N C5136365
hh.
M16 rifle mount installation
●
Eight washers
P/NMS27183-10 (.281 I.D.)
●
Four capscrews
P/N MS90728-8
(.250-20UNC-2Ax1.000 LG)
●
Four machine screws
P/N MS51957-47
●
Four self-locking nuts
P/N MS51943-31
(.250-20UNC-3B)
●
Four self-locking nuts
P/N NAS1022-N08
(.164-32UNC-3B)
●
Rag (Appendix C, Item 5)
●
Six nuts P/N MS51943-33
(.3125-18)
●
Six bolts P/N MS90725-33
(.312-18UNC-2AX.875 LG)
●
Twelve washers
P/N 2436162
●
Two clamp brackets
P/N 12340157
●
Two mounting clamps
P/N 12340487
Two rifle supports
P/N 12340142
ii.
Ladder mount installation
●
One ladder retaining
bracket P/N C5136373
●
Three screws P/N MS51957-81
(.250-20UNC-2Ax.750 LG)
●
Three self-locking nuts
P/N MS51943-31
(.250-20UNC-3B)
●
Six washers P/N MS15795-810
(.281 I.D.)
●
Two self-locking nuts
P/N MS21044C3
(.190-32UNJF-3B)
●
Two screws P/N MS51960-66
4-39


Back to Top