TM-9-2320-362-14-P

TRUCK UTILITY: S250 SHELTER CARRIER, 4X4, M1037 FOR TRAFFIC JAM AN/TLQ-17A(V)3 (HMMWV)

TECHNICAL MANUAL; OPERATOR, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR ELECTRICAL ENVIRONMENTAL SYSTEM (EES)

APRIL 1992

TM-9-2320-362-14-P - Page 157 of 353

TM 9-2320-362-14&P

4-18. EES KIT INSTALLATION (Cont’d)

12.

13.

14.

15.

16.

CAUTION

When cutting insulation, do not cut through en-

gine access cover or equipment’s effectiveness

may be degraded.

From underside of engine access cover (1),

insert insulation template (7)

into holes (4) and (5).

Secure template (7) to engine access cover (1) with two screws (8),

washers (3), and wing nuts (2).

Cut out insulation (6) around outline of insulation template (7).

Trim

cut edges of insulation as needed.

WARNING

When drilling, be sure to wear goggles for eye

protection or injury to personnel may occur.

Remove two screws (8), washers (3), and wing nuts (2). Remove

insulation template (7).

Drilling from front side of engine access cover (l), enlarge hole (5)

using 1 5/8-inch hole saw.

4-45