Change 1
2-1181
TM 9-2320-365-20-2
CONTINUITY TEST
(1)
Disconnect AC power (TM 9-2320-365-10).
(2)
Remove six screws and cover from 110/208
VAC POWER DISTRIBUTION PANEL.
(3)
Loosen screw in terminal board TB4.
(4)
Remove wire 1499B from terminal board
TB4.
(5)
Set multimeter to ohms.
(6)
Connect positive (+) probe of multimeter
to wire 1499B.
(7)
Connect negative (-) probe of multimeter
to neutral pole of 110 VAC receptacle J232
and note reading on multimeter.
(8)
If continuity is not present, repair or replace
wire 1499B (para 2-40).