TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 135 of 1268

TM 9-2320-365-20-3

4-22. CHECKING AND STENCILING HIGH/LOW HAND THROTTLE POSITIONS

This task covers:

a. Checking High/Low Hand Throttle Positions

b. Stenciling High/Low Hand Throttle Positions

Equipment Conditions

Engine shut down (TM 9-2320-365-10).

Tools and Special Tools

STE/ICE-R (Item 39, Appendix C)

Gloves, Rubber (Item 13, Appendix C)

Respirator, Air Filter (Item 29, Appendix C)

Materials/Parts

Rubber Stamp Set, Fixed Type (Item 54, Appendix D)

Polyurethane Coating (Item 49, Appendix D)

Ink, Marking Stencil (Item 27, Appendix D)

Inking Pad, Rubber Stamp (Item 28, Appendix D)

References

TM 9-4910-571-12&P

TB 43-0209

a. Checking High/Low Hand Throttle Positions.

(1) Connect STE/ICE-R to DCA connector (1).

(2) Start engine (TM 9-2320-365-10).

(3) Position HAND THROTTLE lever (2) so that upper edge

of lever is even with line below L setting.

NOTE

Acceptable

engine

RPM

with

HAND

THROTTLE lever at L setting is 1250-1450

RPM.

(4) Perform STE/ICE-R test #10.

4-103