TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 136 of 1268

TM 9-2320-365-20-3

4-22. CHECKING AND STENCILING HIGH/LOW HAND THROTTLE POSITIONS (CONT)

(5) Position HAND THROTTLE lever (2) so that upper edge

of lever is even with line below H setting.

NOTE

Acceptable

engine

RPM

with

HAND

THROTTLE lever at H setting is 2000-2200

RPM.

(6) Perform STE/ICE-R test #10.

(7) Perform subparagraph

b. Stenciling High/Low Hand

Throttle Positions

if engine RPM results from steps (4)

and (6) are not within acceptable limits.

b. Stenciling High/Low Hand Throttle Positions.

(1) Paint over old high and low HAND THROTTLE lever

position markings (TB 43-0209).

(2) Connect STE/ICE-R to DCA connector (1).

(3) Start engine (TM 9-2320-365-10).

(4) Perform STE/ICE-R test #10.

4-104