TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 724 of 1268

TM –9-2320-365-20-3

9-4

Change 2

9-2.

DRIVE SHAFT AND UNIVERSAL JOINT REPLACEMENT/REPAIR (CONT)

(8.1)Tighten four screws (8) to 26-35 lb-ft (35-47 N•m).

(8.2)Fold tabs on four screws (8).

(9)

Deleted.

(10) Perform steps (7) through (9) on opposite end of

drive shaft (3).

(11) Apply lubrication to grease fittings on drive shaft

(3).

f. Follow-On Maintenance.

(1)

Lubricate drive shaft and universal joints (Appendix H).

(2)

Test drive vehicle and check for unusual vibrations.

End of Task.

CAUTION

Grease must flow from all four seals.

Failure

to comply may result in damage to

equipment.

NOTE

Perform the following two steps on bearing

cups equipped with tabs.