TM-9-2320-365-20-5

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-5 - Page 311 of 666

TM 9-2320-365-20-5

Change 2

20-481

20-84.

M1078/M1081 S-280 SHELTER MODELS A, B, OR C TIEDOWN KIT

INSTALLATION/REMOVAL

This task covers:

a. Installation

b. Removal

c.

Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-365-10).

Cargo bed side panels and stakes removed (TM 9-2320-

365-10).

Tools and Special Tools

Drill Set, Twist (Item 8, Appendix C)

Drill, Portable, Electric (Item 7, Appendix C)

Tap, thread, cutting (Item 40.3, Appendix C)

Tap and Die Set, (Item 40.2, Appendix C)

Tools and Special Tools (Cont)

Tool Kit, Genl Mech (Item 44, Appendix C)

Sling, Cargo (2) (Item 31, Appendix C)

Materials/Parts

Lockwasher (8) (Item 66.2, Appendix G)

Nut, Self-Locking (4) (Item 143, Appendix G)

Personnel Required

(2)

a.

Installation.

(1)

Measure and mark a line (1) 1.25 in. (32 mm) down

from upper RH corner of tiedown bracket (2).

(2)

Measure and mark a line (3) 4.4 in. (109 mm) from

RH side of line (1).

(3)

Measure and mark a line (4) 4.72 in. (120 mm) from

RH side of line (3).

NOTE

This paragraph applies to shelter models A,

B, or C with an overall height of 83 1/2 to 89

in. (214 to 226 cm).

If shelter height is below

83 1/2 in. (214 cm), shorten cable for proper

removal of slack in turnbuckle assembly.

NOTE

•

Perform steps (1) through (6) on tiedowns

not originally modified.

•

All tiedowns are modified the same way.

RH front tiedown shown.

•

Measurements will be taken from upper

LH corner on LH tiedown bracket.