TM 9-2320-365-20-5
20-482
Change 2
20-84.M1078/M1081 S-280 SHELTER MODELS A, B, OR C TIEDOWN KIT
INSTALLATION/REMOVAL (CONT)
(4)
Drill two 27/64 in. holes (5) in tiedown bracket (2).
(5)
Tap two holes (5).
(6)
Perform steps (1) through (5) on remaining tiedowns.
(7)
Position slider (6) and stop (7) on tiedown bracket
(2) with two lockwashers (8), washers (9), and screws
(10).
(8)
Install threaded block (11) in tiedown bracket (2) with
eyebolt (12).
(9)
Perform steps (7) and (8) on remaining tiedown
brackets.
(10) Remove four quick release pins (13) and plugs (14)
from crane pockets (15).
(11) Lower ladder (TM 9-2320-365-10).
WARNING
Ensure cargo bed is free of equipment
and debris, and is not warped or
damaged.
Failure to comply may result
in serious injury or death to personnel
or damage to equipment.
NOTE
All tiedowns are assembled the same way.
RH front tiedown bracket shown.