TM 9-2320-365-34-2
9-12
Change 2
9-3.
FRONT AXLE SHAFT AND SEALS REPLACEMENT (CONT)
(2)
Remove 10 screws (3), washers (4), and brake
assembly (5) from steering knuckle (6).
(3)
Remove spindle assembly (7) from steering
knuckle (6).
(4)
Remove outer seal (8) from spindle assembly (7).
Discard seal.
(5) Remove front axle shaft (9) from front axle housing
(10).
(6) Remove inner seal (11) from front axle housing (10).
Discard inner seal.
WARNING
Brake shoes may be covered with dust.
Breathing this dust may be harmful to
your health.
Do not used compressed air
to clean brake shoes.
Wear a filter mask
approved for use against brake dust.
Failure to comply may result in injury to
personnel.
NOTE
Step (2) requires the aid of an assistant.