TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 478 of 1414

TM 9-2320-365-34-2

9-8.2

Change 2

9-2.

FRONT AXLE ASSEMBLY REPLACEMENT (CONT)

(14) Tighten four screws (18).

(14.1) Tighten four screws (18) to 26-35 lb-ft (35-47 N•m).

(14.2) Fold tabs on four screws (18).

(15) Connect drag link end (19) to pivoting arm (20).

(16) Position nut (21) on drag link end (19).

(17) Tighten nut (21) to 140-170 lb-ft (190-230 N•m).

(18) Install cotter pin (22) in nut (21).

NOTE

•

Perform the following step on kits

equipped with shearhead screws.

•

Alternately tighten screws.

•

When correct torque is reached, bearing

cup small screw hex head will break off.

NOTE

Perform the following two steps on bearing

cups equipped with tabs.