TM 9-2320-365-34-2
Change 2
9-5
(17) Position transmission/differential lift under front
differential (29).
(18) Secure front differential (29) to transmission/
differential lift with chain.
(19) Raise transmission/differential lift to apply pressure
to front differential (29).
(20) Remove nut (30), washer (31), and bolt (32) from
front shock absorber (33).
(21) Remove four self-locking nuts (34) and mounting
pad (35) from two U-bolts (36).
Discard self-locking
nuts.
(22) Remove two U-bolts (36) from leaf spring (37).
Discard U-bolts.
(23) Perform steps (20) through (22) on left side of front
axle assembly.
(24) Remove front axle assembly (8) from vehicle.
WARNING
Front axle assembly weighs
appro-
ximately 1580 lbs (717 kgs).
Front axle
assembly must be supported on a
transmission/differential
lift
during
removal.
Failure to comply may result in
injury to personnel or damage to
equipment.
NOTE
Left and right sides of front axle assembly
are removed the same way.
Right side
shown.
NOTE
Step (24) requires the aid of two assistants.