TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 472 of 1414

TM 9-2320-365-34-2

9-4

Change 2

9-2.

FRONT AXLE ASSEMBLY REPLACEMENT (CONT)

(12) Remove self-locking nut (16), screw (17), and

clamp (18) from bracket (19).

Discard self-locking

nut.

(13) Perform steps (7) through (12) on left side of front

axle assembly.

(14) Remove cotter pin (20), nut (21), and draglink (22)

from pivoting arm (23).

Discard cotter pin.

(15) Lift tabs from two bearing cups (24).

(15.1) Remove four screws (25) and two bearing cups

(24) from drive yoke (26).

Discard screws.

(16) Slide drive shaft (27) from side to side and

separate universal joint (28) from drive yoke (26).

(16.1) Attach drive shaft (27) to crossmember (28.1).

NOTE

There are two types of bearing cups, those

with tabs and those without. Perform the

following step on bearing cups with tabs.