TM-9-2320-365-34-2
10-8.2
Change 2
10-2.
REAR AXLE ASSEMBLY REPLACEMENT (CONT)
(20) Tighten four screws (26).
(20.1) Tighten four screws (26) to 26-35 lb-ft (35-47 N•m)
(20.2) Fold tabs on four screws (26).
NOTE
Perform steps (20.1) and (20.2) on bearing
cups equipped with tabs.
NOTE
•
Perform step (20) on kits equipped with
shearhead screws.
•
Alternately tighten screws.
•
When correct torque is reached, bearing
cap screw small hex head will break off.