TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 527 of 1414

TM 9-2320-365-34-2

Change 2

10-13

(9)

Tighten four screws (11).

(9.1) Tighten four screws (11) to 26-35 lb-ft (35-47 N•m).

(9.2) Fold tabs on four screws (11).

(10) Apply lubrication to grease Fittings (TM9-2320-366-

20).

c. Follow-On Maintenance.

(1)

Check differential oil level (TM 9-2320-365-20).

(1.1) Lubricate drive shaft universal joint and slip yoke (TM 9-

2320-365-20-1).

(1)

Operate vehicle and check for proper operation (TM 9-

2320-365-10).

(3)

Shut down engine (TM 9-2320-365-10).

(4)

Check pinion seal for oil leaks.

End of Task.

CAUTION

NOTE

•

When correct torque is reached,

bearing cap screw small hex head will

break off.

•

Alternately tighten screws.

•

Perform the following step on kits

equipped with shearhead screws.

NOTE

Perform the following two steps on bearing

cups equipped with tabs.

Grease must flow from all four seals.

Failure

to comply may result in damage to

equipment.