TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 936 of 1414

TM 9-2320-365-34-2

18-28

Change 2

18-4.

DIGITIZATION KIT INITIAL INSTALLATION

This task covers:

a. Installation

b. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-365-10).

Batteries disconnected (TM 9-2320-365-20-3).

Cab storage boxes removed (TM 9-2320-365-20-4).

Seat belts removed (TM 9-2320-365-20-4)

Small arms mounts removed (TM 9-2320-365-20-4)

Rear boarding handles removed (TM 9-2320-365-20-

4)

RH seat removed (TM 9-2320-365-20-4)

Power distribution panel removed for access (TM 9-

2320-365-20-4)

Kick panel removed (TM 9-2320-365-20-4)

Tools and Special Tools

Tool Kit, Genl Mech (Item 68, Appendix B)

Goggles, Industrial (Item 25, Appendix B).

Drill Electric, Portable (Item 18, Appendix B)

Drill Set, Twist (Item 17, Appendix B)

Machine Gun Ring Drill Stop (Item 9, Appendix D)

Tools and Special Tools (Cont.)

Clamp (2) (Item 10, Appendix B)

Wrench, Torque (0-200 lb-in) (Item 81, Appendix

B)

Wrench Set, Socket (Item 75, Appendix B)

Drill Stop Collar Set (Item 20.1, Appendix B)

Materials/Parts

Ties, Cable Plastic (Item 89, Appendix C)

Rivet, Compression (4) (Item 250.1, Appendix F)

Sealant (Item 64.1, Appendix C)

Antiseize (Item 13.1, Appendix C)

Personnel Required

(2)

Reference Material

TB43-0242

a. Installation

(1)

Position RH template (1) on rear cab wall (2) with

two screws (3).

(2) Drill two 3/16” (5 mm) pilot holes at locations (4).

(3)

Remove two screws (3) and template (1) from rear

cab wall (2).

WARNING

CAUTION

Wear appropriate eye protection when

drilling holes.

Failure to comply may

result in injury to personnel.

Drill bit stop must be used to limit the depth

of drill bit travel.

Failure to comply may

result in damage to cab.