TM 9-2320-365-34-2
18-30
Change 2
18-4.
DIGITIZATION KIT INITIAL INSTALLATION (CONT)
(12) Enlarge holes at location (9) to 17/32” (13 mm).
(13) Apply primer and paint to RH roof holes at location
(9).
(14) Apply primer and paint to six rivnuts (6).
(15) Install rivnuts (6) to RH roof holes at location (9).
(16) Remove screw (10), washer (11), and bracket (12)
from right side panel (13).
(17) Remove seven fasteners (14) and right side panel
(13) from RH cab side wall (15).
Discard fasteners.
NOTE
Use primer and paint as indicated in TM
Paint, TB43-0242.