TM 9-2320-365-34-2
Change 2
18-33
(36) Enlarge three holes at locations (20) to 25/64” (10
mm).
(37) Apply primer and paint to three holes in cab roof
(8) at locations (20).
(38) Apply primer and paint to three rivuts (21).
(39) Install three rivnuts (21) in cab roof (8) at locations
(20).
b.
LH Stowage Box Assembly.
(40) Remove six nuts (22), washers (23), screws (24),
and storage box cover (25) from storage box (26).
(41) Remove two nuts (27), screws (28), and clamp (29)
from storage box cover (26).
(42) Remove cotter pin (30), washer (31), and cover
support arm (32) from storage box (26).
Discard
cotter pin.
(43) Remove rubber grommet (33) from storage box
(26).
Discard rubber grommet.
(44) Remove two nuts (34), screws (35), and clamp (36)
from storage box (26).
NOTE
Use primer and paint as indicated in TM
Paint TB43-0242.