TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 950 of 1414

TM 9-2320-365-34-2

18-42

Change 2

18-4.

DIGITIZATION KIT INITIAL INSTALLATION (CONT)

(89) Position radio rack in cab.

(90) Position radio rack on bottom support (81).

(91) Apply sealant to threads of eight screws (114).

(92) Position eight washers (115) and screws (114)

in bottom support (81).

(93) Tighten eight screws (114) to 110-120 lb-in (12-14 N•m).

(94) Apply sealant to threads of six screws (116).

(95) Position MTS plate (82) on bottom support (81) with

six washers (117) and screws (116).

(96) Tighten six screws (116) to 70-80 lb-in (8-9 N•m).

(97) Position four self-locking nuts (118) on MTS plate

(82).

WARNING

NOTE

•

Position radio rack in cab with out top or

bottom support or MTS plate.

Forward

of RH seat mounting location.

Slide

radio rack towards rear of cab.

•

Steps (89) and (90) require the aid of an

assistant.

Adhesives,

solvents,

and

sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing.

Keep away from open fire

and use in a well-ventilated area.

If

adhesive, solvent, or sealing compound

gets

on

skin

or

clothing,

wash

immediately with soap and water.

Failure

to comply may result in injury to

personnel.

NOTE

Position MTS plate with slotted holes

towards rear of cab.