TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 949 of 1414

TM 9-2320-365-34-2

Change 2

18-41

(80) Apply sealant to threads of four screws (98).

(81) Install Power Distribution Panel (99) on support legs

(73) with four washers (100) and screws (98).

Refer

to Table 18-1 for hole locations.

(82) Position PLGR/M42 Alarm Plate (101) on support

legs (73) with four washers (102), screws (103), and

self-locking nuts (104).

(83) Tighten four self-locking nuts (104) to 110-112 lb-in

(12-14 N•m).

(84) Apply sealant to threads of 12 screws (105).

(85) Install top rear wall (106) and front head pad brace

(107) on support legs (73) with four washers (108)

and screws (105).

Refer to

Table 18-1

for hole

locations.

(86) Install Sincgars Shelf (109) on support legs (73)

with four washers (110) and screws (105).

Refer to

Table 18-1

for hole locations.

(87) Apply sealant to threads of two screws (111).

(88) Install head pad (112) on front head pad brace

(107) with two washers (113) and screws (111).

WARNING

Adhesives,

solvents,

and

sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing.

Keep away from open fire

and use in a well-ventilated area.

If

adhesive, solvent, or sealing compound

gets

on

skin

or

clothing,

wash

immediately with soap and water.

Failure

to comply may result in injury to

personnel.