TM-9-2320-366-10-2
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; OPERATOR’S INSTRUCTIONS; VOLUME NO. 2 OF 2
AUGUST 2005
CHANGE 2
TM-9-2320-366-10-2 - Page 570 of 930
TM 9-2320-366-10-2
Table 3-2. Troubleshooting (Cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
e. ELECTRICAL SYSTEM (CONT)
e90.
WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) ILLUMINATION
DOES NOT DIM (CONT).
(c)
If circuit breaker is tripped, push in to reset.
(d)
Position master power switch to on (para 2-27a or b).
(e)
Check circuit breaker to see if it tripped. If circuit breaker is tripped, notify Unit Maintenance.
(f)
Position master power switch to off (para 2-27f).
(g)
Install PDP cover (para 3-17b).
(h)
If WTEC II TEPSS illumination still does not dim, notify Unit Maintenance.
e91.
DIFFERENTIAL LOCK SOLENOID DOES NOT OPERATE.
Notify Unit Maintenance.
e92.
ENGINE FAN RUNS CONSTANTLY.
Check circuit breaker (CB22) in PDP to see if it is tripped.
(a)
Remove PDP cover (para 3-17a).
(b)
Shut down engine (para 2-27f).
(c)
If circuit breaker is tripped, push in to reset.
(d)
Start engine (para 2-27a or b).
(e)
Check circuit breaker to see if it tripped. If circuit breaker is tripped, notify Unit Maintenance.
(f)
Shut down engine (pare 2-27f).
(g)
Install PDP cover (para 3-17b).
(h)
If engine fan still runs constantly, notify Unit Maintenance.
e93.
ENGINE FAN DOES NOT TURN OFF USING RADIATOR FAN OFF SWITCH.
Check circuit breaker (CB22) in PDP to see if it is tripped.
(a)
Remove PDP cover (para 3-17a).
(b)
Shut down engine (para 2-27f).
(c)
If circuit breaker is tripped, push in to reset.
(d)
Start engine (para 2-27a or b).
(e)
Check circuit breaker to see if it tripped. If circuit breaker is tripped, notify Unit Maintenance.
(f)
Shut down engine (para 2-27f).
3-70
Change 1
Back to Top
