TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 1017 of 1824

CONTINUITY TEST

TM 9-2320-366-20-1

Change 1

2-604.85

(1)

Remove nut, lockwasher, terminal lug TL32,

and lockwasher from RH rear marker light

screw.

Discard lockwashers.

(2)

Remove nut, lockwasher, terminal lug TL31,

and lockwasher from middle rear marker light

screw. Discard lockwashers.

(3)

Set multimeter to ohms.

(4)

Connect positive (+) probe of multimeter

to terminal lug TL32.

(5)

Connect negative (-) probe of multimeter to

terminal lug TL31 and note reading on

multimeter.

(6)

If continuity is not present, repair wire

3094 from terminal lug TL32 to terminal

lug TL31 (para 2-45) or replace M1089

rear lights cable assembly (para 7-104).

(7)

If continuity is present, replace RH rear

marker light (para 7-38).

(8)

Install lockwasher, terminal lug TL31,

lockwasher, and nut on middle rear

marker light screw.

If vehicle is not M1089, replace RH rear marker

light (para 7-38).

(9)

Install lockwasher, terminal lug TL32,

lockwasher, and nut on RH rear marker

light screw.

(10)

Connect RH rear marker light connector

to connector P58.